12-Month interest-free installments for HSBC,Manhattan and Standard Chartered are accepted
(*只限 匯豐／渣打／Manhattan 信用卡)
The Fuzz Probe is a kind of cross between a theremin and
a fuzz factory. There is a 3 5/8” antenna plate mounted on a
chunk of 3/8” clear acrylic that passes over the top of the ped-
al housing, angles down to sharp turn, and goes back to the
pedal. Under the whole mess is a 3 5/8” by 7” sheet of alumi-
num that provides shielding from annoying ground effects and
wires under the stage. It also serves to protect the knobs from
being knocked off if you drop it on them... and it makes a nice
toe chopper if you are barefoot, so (legal disclaimer:) DO NOT
DROP THIS PEDAL ON YOUR FOOT! IT IS HEAVY AND
HAS VERY POINTY CORNERS THAT COULD DAMAGE
LIVING CREATURES AND FINE HARDWOOD FLOORING.
ALSO, YOU COULD BREAK SOMETHING. Like your dog.
WHAT DOES THIS PEDAL DO?
Already, it should be apparent that this is the most dangerous
pedal I have ever made. Ow! The antenna plate projects a field
of RF energy that is affected by your foot (or other appendage), al-
tering the circuit that generates it, and in so doing, increasing the
brightness of that LED on the top of the pedal and also controlling
the STABILITY (STAB) knob on the back. I could have made it
just control that LED, I mean, that’s enough for some people, but
nooo, I went and connected it to the stability knob too. This lets
you select your favorite squealy Fuzz FactoryTM setting (doesn’t the
band love that?) and then mess around with the STAB knob with
your foot and create little melodies and interference modulations
with your guitar (doesn’t the band love that even more?).